Creative Army Huevo - PU

 

The Huevo, is a classic hybrid surfboard that incorporates the best of both the shortboard and longboard. Its round nose and fuller tail gives plenty of floatation and makes paddling a breeze. With its shorter length and 2 + 1 fin set up makes for fast responsive turns and manoeuvrability.

OUTLINE: Its fuller outline with the wide point slightly forward of centre means you can trim and glide forward on the board, adds to the great paddle power and to the stability and flow, while its round tail makes for smoother transitions between turns.

ROCKER: With an emphasis on being an all-rounder it has a low to medium rocker, this is why you will find this board paddles with ease and flows through those dead sections with minimal effort. A slight lift in the nose makes those late take offs easier and the slight lift in the tail makes for a nice drive through your turns.

CONTOURS: A nice classic slight rolled Vee from nose to tail makes it effortless for those rail to rail transitions, while the stance is anywhere on the board, however getting back over the fins the board will turn on a dime.

DECK LAYUP: 1 x 6oz + 1 x 4oz Fiberglass Cloth

BOTTOM LAYUP: 1 x 4oz cloth + 1 x 4oz Fin Patch

PERFORMANCE: Think summer grovely beach breaks when you don’t want a Longboard or it’s too small for your Shortboard or winter reefs and perfect points. This board can handle anything from waist to double overhead and any ability from beginner to advance. Enjoy

 

NOTE: Fins supplied with this board / Rider weight is based on board volume and intermediate rider skill level

LENGTH	WIDTH	THICK	VOLUME	FINS	APPROX WEIGHT RANGE
6'10"	21 1/8"	2 3/4"	44.4 ltr	7" CA Custom Fin (supplied) / FCSII Performer Quad Rears (rcmd)	70kg
7'6''	21 7/8''	2 3/4''	50.95 ltr	7" CA Custom Fin (supplied) / FCSII Performer Quad Rears (rcmd)	80kg
8'1''	22 1/8''	2 7/8''	59.1 ltr	7" CA Custom Fin (supplied) / FCSII Performer Quad Rears (rcmd)	90kg +

Construction	Polyester - PU Polyester or PU construction uses traditional materials and laminating techniques to produce a strong, reliable surfboard with high-quality finishes. All polyester boards are CNC milled from the shapers files and laminated by hand using quality components such as Hexcel fiberglass, Silmar resin and Bennett foam. For years traditional polyester boards have been at the forefront of performance surfing. These boards feature a progressive flex pattern controlled by a high-grade timber stringer and feel very reliable under your feet. Polyester construction will perform in all surf conditions and can be adapted to suit a wide variety of surfboard models. You can find out more about GSI’s surfboard construction on our surfboard construction page.
Board Contours	Vee Concave
Rail	Neutral Rail
Surfer Skill Level	Beginner - Advanced
Wave Height	1-8ft